The size of the opening on the RC Manufacturing Z-Series Truck or Trailer Underbody Tool Box part # UB1818-48 is 44" wide x 14" tall. view full answer...
According to my contact at DeeZee the aluminum Brite-Tread material used in construction of this underbody toolbox # DZ76 is 15-gauge. Please note that this tool box requires their universal mounting kit # DZDB-2502 for installation. This kit consists of two 18-inch x 18-inch L-brackets and a bag with the required hardware.
Tools required for installation include a drill, clamps, wrenches and a measuring tape.
For your reference the installation instructions are provided. view full answer...
The RetraxPRO MX Hard Tonneau Cover - Retractable - Aluminum - Matte # RT80383 will have a measurement of 11-5/8 deep by 13-3/4 inches long by 63 inches wide. I reached out to the manufacturer to confirm these dimensions and created a photo to assist.
This type of a cover will work extremely well with a tool box that opens from the front like the DeeZee Specialty Series Underbody Toolbox - Steel - 9 Cu Ft - Black # DZDB-2602 or the DeeZee Specialty Series Underbody Toolbox - Brite-Tread... view full answer...
The Replacement Compression Latch # 313-8-325-281 for the RC Manufacturing Z-Series Truck or Trailer Underbody Tool Box # UB1818-36 is 5-1/2" wide and 6" tall(see image).
If you can provide me with the manufacturer of the storage box with any model numbers or any information that may be on any data tag I can determine if we have a latch that will fit and operate with your storage box correctly. view full answer...
I reached out to the manufacturer, Buyers Products, who told me the exact interior dimensions are 21" wide x 16-1/2" deep x 14-1/2" tall for the underbody toolbox you asked about, which is the following part number:
- Buyers Products Underbody Toolbox # 3371717100
It is a locking toolbox that comes with a pair of keys, has outside dimensions of 24" wide x 18" deep x 18" tall, and can be mounted with the Mounting Brackets # 3371701000. view full answer...
The DeeZee Specialty Series Underbody Toolbox part # DZ75 weighs 42 lbs.
The overall dimensions are 48" long x 20" wide x 18" tall and this holds 9.5 cubic feet. view full answer...
I spoke with a representative of DeeZee who told me that the DeeZee Specialty Series Underbody Toolbox # DZ76 can hold up to 250 lbs so long as the weight is evenly distributed.
This toolbox has 11.9 cubic feet of cargo capacity, measures 60" long x 20" wide x 18" tall and comes with a lifetime warranty.
Keep in mind this toolbox will require the DeeZee Mounting Kit # DZDB-2502 to install.
I have added a link to a video review of the toolbox for you to check out as well. view full answer...
I spoke with my contact at DeeZee and they informed me that the opening of the DeeZee Cargo Box part # DZDB-2600 measures 23 inches long by 17 inches tall.
I attached a picture that shows these dimensions. view full answer...
The TorkLift PowerArmor Locking Battery Box - 6V and 12V Batteries - Diamond Plate Aluminum Item # TLA7708R is 26-3/4" x 8-3/16" measured on the outside of the box not including the lid.
You could use something like DeeZee Specialty Series Underbody Toolbox - Steel - 4.5 Cu Ft - Black Item # DZDB-2600 as a battery box but you would need to add holes for the wiring and ventilation. It is 24" long x 18" wide x 18" tall overall. You would also need universal mounting kit # DZDB-2502. I have... view full answer...
The UWS Slim Line Truck Bed Toolbox # UWS00405 and # UWS00280 both have a measurement of 9" from the edge of the tool box base to the outside edge of the handle for opening the tool box.
You can use these boxes with either of the UWS Truck Bed L-Shaped Side Rail Toolbox 48" # UWS01600 or 60" # UWS01603 but you will need to leave a gap between the boxes for the handles to clear. I recommend leaving around 6" so that you will be able to easily reach between the boxes rather than trying... view full answer...
To use the Truxedo TonneauMate Truck Bed Tool Box # TX1117416 you will need to have at least 22.25" from the front of the bed to the back edge of the bed slide and at least 14.75" depth in the bed. If when fully slid into your bed for storage the slide does not provide that much space, this Truck Bed Tool Box won't work on your 2016 F-150.
If you don't have that much space, but can provide me with the dimensions of space you have with your bed slide I can help recommend an alternate... view full answer...
The Curt Hitch Cargo Carrier 24x60 # C18152 that you referenced should work well to transport your tool box as long as it and your tools do not exceed the weight capacity of cargo carrier. This carrier has a weight capacity of 500 lbs.
The inside dimensions of this carrier are 24 inches by 60 inches which would easily accommodate your tool box that is 19-1/4 inches by 56 inches even with its rounded corners. view full answer...
The Dee Zee tool box you referenced, part # DZ8370SB is the deepest gull wing crossover-style box Dee Zee offers for your Tundra. DeeZee offers a single lid toolbox that is 69-3/4 inches long by 20 inches wide by 18-1/4 inches tall that has an 11.7 cubic foot capacity, part # DZ8170DLB. The box features a black finish.
For a complete listing of tool boxes offered for your Tundra, click on the provided link. view full answer...
Yes, the Du-Ha Truck Storage Box part # DU10037 will carry two rifles as well as your jack and other tools in the bins that are on either side of the gun rack like in the picture I attached. view full answer...
There is no absolute rule for spacing between the forward side of a 5th wheel hitch and a tool box mounted between it and the cab, but I would say 6 inches would be an appropriate minimum in most instances. We do have recommended clearance distances between the various points of the trailer and truck that you can see in the linked diagram. You want to ensure the front loft of the trailer can clear the top of the tool box. view full answer...
Yep, you're 100 percent right; the distance under the bed bed rails will be 7-3/16 inches for the DeeZee Red Label Truck Bed Tool Box - Crossover Style # DZ8170B.
The # DZ8170B is 13-3/16 inches tall altogether, with 6 inches above the bed rails and the remaining 7-3/16 inches below the bed rails. With how tall truck bed rails are nowadays you will have plenty of room under the toolbox. view full answer...
One latch. The Replacement Handle Latch and Key for RC Manufacturing A-Frame Trailer Tongue Tool Boxes item # 3W-461-545-SSL-EP is sold individually. view full answer...
We have the A-frame tool box part # UWS01039 which would be tall enough for a propane tank that is 19 inches tall but the # 313-TM362016M would be just a little bit too short for that.
I attached a review video for more info on this for you to check out as well. view full answer...